Casting Plates
(click here)

Vibration Isolation
(click here)
_  
  ENGINE TILTING TABLE
MULTI-AXIS SHAKING TABLE
AXLE TEST FIXTURE
- Standard Fixture EAB
- Suspension Development
- 6 Degree of Freedom (6 DoF)
- Acoustics and Modal Analysis
- Kinematics & Compliance
VIMM (VEHICLE INERTIA
MEASURING SYSTEM)
(NEW)
EXHAUST TEST RIG FIXTURE
  X-Y POSITIONING SYSTEMS
- 4-Poster Test System
- Head Impact Pendulum
- Driveline Test System
TORSIONAL SYSTEMS
PORTAL FRAMES
STEEL FLOORS
MAINTANANCE PLATFORM
ELEVATING TABLE
SPRING CLAMPS
FINITE ELEMENT ANALYSIS
SOFTWARE XiCon
SOFTWARE XiCon OIS
INTRODUCTION
MOCOKIT 25 (up to 5.5 kip)
- EXAMPLES
- COMPONENT LAYOUT
- COMPONENTS
MOCOKIT 65 (up to 14 kip)
- EXAMPLES
- COMPONENT LAYOUT
- COMPONENTS
MOCOKIT 250 (up to 55 kip)
- EXAMPLES
- COMPONENT LAYOUT
- COMPONENTS

Finite Element Methods Analysis

By means of FEM-calculation we conduct tension- deformation- and modal analyses for various components. Modal analyses in particular play a key role in the testing industry, because the natural frequency of the component and the testing frequency must not interfere.
Vibrations transmitted into buildings or other components mean a major security risk for people, buildings and machines. To avoid this we use FEM-programs to plan foundations with an ideal spring system and seismic mass for your particular test rig. For this we use the software Nastran for Windows. The example shown below presents an aluminum vibrating table, which has been analyzed concerning its natural frequency and modality with maximum force. The first natural frequency was required above 100 Hz.

download pdf brochure
get the Acrobat Reader
_For more information: E-mail: contact@cfm-itbona.com Phone: +1 (952) 942-6104 FAX: +1 (952) 942-6106
   


 
Copyright@2002 - 2006 CFM-ITBONA LLC. All Rights reserved
CFM-ITBONA LLC, 4282 SHORELINE DRIVE, SPRING PARK, MN 55384, USA